A2F-Filters.com

HYDRAULIC FILTER

PORTABLE FILTRATION Trolley SYSTEM FROM A2F

Off- line contamination control of fluid systems. Replenishing installations with filtered fluid. Emptying waste fluid quickly.

The A2F Portable Filter System is designed for on-site preventive maintenance of fluid systems.

Two/ Three high capacity filters are used, with fluid passing through a primary clean-up filter and then through the final filter giving effective contaminating control.

Two/ Three high capacity filter, complete with indicator. Filters incorporate standard A2F media. From 3 to 74 micron absolute. 28 I / min. pressure balanced gear pump. Robust all welded steel trolley 28 LPM. Up to 58 LPM. Complete with drip tray and rubber - tyred wheels. Complete with stowable hoses. Compatible with hydraulic oils, coolant fluids and petroleum-based fluids.

HYDRAULIC SECTION

SUCTION STRAINERS

LOW PRESSURE FILTERS

PRESSURE LINE FILTERS

HI PRESSURE ABSOLUTE FILTERS

SPINON FILTERS

RETURN LINE FILTERS

FILTRATION TROLLEY

Most contaminants in hydraulic or lube oil system are invisible and this damaging particulate false into 5 to 40 micron size ranges. A normal human being with normal vision can see best up to 40 microns, hence some other means is to be used a monitor fluid conditions.it system has its own optimum cleanliness level depending on the number and types of valves actuators system pressure flow rates viscosity and other factors.

To select a filter is a two step process. first to collect the data of operation and best on this the filter media.

Hydraulic filters are design using pre filter media's for suction stenless still mesh is used for pressure line and for absolute quality of filter. Borocilicate micro glass fiber paper is used and for return line and low-pressure filtration impregnated cellulose paper being used.

In borocilicate micro glass fiber paper the filtration ranges from 1 to 25 micron bita ratio between 75 to 200.

Caltex Portable Filter System design for onsite preventive maintenance of fluid systems.

3 high capacity filters are used which incorporates 149 micron, 50-micron mesh type filters strainer and one Absolute borocilicate glass fiber filter of 10 micron absolute.

With 30 l/m pressure balance gear pump having 0.5 kW capacitor start electric motor. Regied and robust welded still trolley with tray and caster wheels. Compatible for coolant petroleum fluits hydraulic oils for other applications MOC will change hence request to contact factory.

HYDRAULIC FILTERS FOR PRESSURE LINE SALIENT FEATURES :

Exemplary Beta Stability over a wide differential pressure range ( superb absorption of finest particles over a wide differential pressure ) High collapse strength & filtration integrity. Rugged in construction & high reliability in operation.

High contamination retention capacity due to large specific absorption area. High temperature & chemical resistance due to the use of epoxy resin for impregnation & bonding. Comprehensive range of filter elements with wide range of micron ratings to suit most of the a application areas. Long services life & Economical.

HYDRAULIC FILTERS FOR PRESSURE LINE DISPOSABLE ELEMENTS BASED ON IN ORGANIC FIBRE:

Pleated element. Flow direction from out to in.

Superb adsorption of fines particles over a wide differential pressures range. High contamination retention capacity due to large specific absorption area High chemical resistance due to use of epoxy resin for impregnation and bonding. Element protection due to high burst pressure resistance cold start and differential pressure. Water of water traces in the hydraulic fluid do not reduce filtration effect. Filtration 3,5,10 & 20 micron absolute.

HYDRAULIC FILTERS FOR RETURN LINE DISPOSABLE ELEMENTS BASED ON IN ORGANIC FIBRE :

Fitted with by-pass valve. Pleated element. Flow direction from out to in. Superb adsorption of Finest particles over a wide differential pressure range. Exemplary Beta Stability over a wide differential pressure range. High contamination retention capacity due to large specific absorption area. High chemical resistance due to use of epoxy resin for impregnation and bonding. Element protection due to high burst pressure resistance cold start and differential pressure. Water of Water traces in the hydraulic fluid do not reduce Filtration effect. Filtration 3,5,10 & 20 micron absolute.

WIRE MESH ELEMENTS :

High temperature range Corrosion protection due to stainless steel filter material and zinc pleated steel parts. Cleanable High differentials presser filtration

25 micron nominal. Fine filtration can be available on demand.

SUCTION STRAINER FILTERS :

Elements can be re-used after manual cleaning with brush and cleaning agent. Wash filter with cleaning liquid from the inside to the outside to remove coarse external contaminants in a separate cleaning tank.

SPECIFICATION :

Filtration Range : Standard filters are 149 microns but in fine range available up to 25 microns. Working Temp. Range : up to 12ºc flow Capacity : 15 to 600 Lit/ min. End cap Material : Steel duly zinc plated & aluminous die casting. Liner tube material : Galvanized steel wire mesh material : Stainless steel .

WIRE MESH ELEMENTS :

High temperature rang Corrosion protection due to stainless steel filter material and zinc plated steel parts. Cleanable, High differentials pressures. Filtration 25 micron. Fine filtration can be available on demand.

HYDRAULIC FILTERS

SUCTION STRAINERS

Reusable SS mesh / 149 micron Tank Mounted reusable strainer Flow to 40 GPM Maximum Pressure 10 bar.

Metal Media Pleated Elements :

A2F Metal elements area designed and fabricated for removal of hard, coarse article contaminants from hydraulic, lubricating and cutting oils and from fuel and solvents. Made in cylindrical or pleated form with single/ multi layer screens, a large variety of metals. These are available in the 5 + 250 micron in selective range, with a maximum temperature and with 550 bar collapsed pressure rating.

IDEAL FOR COOLANT FILTRATION, HIGH QUALITY NON WOVEN FILTER MEDIA , COMPLETE RANGE OF FILTER MEDIA FOR INDUSTRIAL COOLANT FILTRATION APPLICATIONS EDM / WIRE CUTT / CNC MACHINE FILTERS

COMPLETE RANGE OF FILTER MEDIA FOR INDUSTRIAL COOLANT FILTRATION APPLICATIONS LIKE :

Grinding, Lapping, Rolling, Tube mills, Honing, Milling, Wire Drawing, Parts Washing Solvents.

Media consist of superior uniform laying of fibers providing tortuous path for contaminate coolant to be filtered, instead of acting as a simple mechanical screen.

The accumulating of arrested contaminants collected mainly on the outer surface of filter media efficiency of filter media by acting as a filter bed.

Complete range of VISCOSE media from 20 gsm to 60 gsm for all Gravity BAND & Compact Band Filter, Media made of unidirectional dry-laid viscose web with average uniformity with high pore Volume to match your individual problem.

Complete range of POLYESTER & POLYPROPYLENE media from 20 gsm to 200 gsm for Vacuum and Pressure Filter. Media made of spun bonded Polyester and PP fibers Provides good strength in all directions and retains even the finest impurities.

Media Suitable For

Gravity band Filter,
Compact Band Filter,
Hydrostatic Filter,
Vacuum Filter,
Pressure Filter.

Several factors are taken into account to arrive at most suitable filter media like.

Filter Systems, Available filtration Area, Existing Filter Media, Coolant to be filtered, Particle Size of Impurities, Viscosity of Coolant, Machining Operation, Material of Machined Component, Machining Finish.

EDM / CNC / WIRE CUTT FILTERS AIR CURTAINS & PLASTIC CURTAINS.